Product Reviews

SMALLRIG 6314 Adjustable Monitor Mount Review

A compact camera monitor mount for creators who need landscape or portrait positioning, broad angle adjustment, and a locating connection to compatible support gear.

This article contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.

The SMALLRIG Adjustable Camera Monitor Mount review is most relevant to camera operators who want a monitor positioned for either landscape or portrait work, with angle changes built into a compact mount.

Its 6314 design combines a 3/8"-16 ARRI locating screw at the base with a retractable 1/4"-20 locating screw and anti-twist details at the top.

SMALLRIG 6314 Mount Review Summary

The quick verdict

SMALLRIG 6314 Adjustable Monitor Mount
4.7/5

800+ ratings

Read Amazon Reviews

SMALLRIG 6314 Adjustable Monitor Mount

A compact camera monitor mount for creators who need landscape or portrait positioning, broad angle adjustment, and a locating connection to compatible support gear.

  • Model 6314 is designed to mount a video monitor on a camera cage, top handle, or other support with a 1/4"-20 threaded hole or locating hole.
  • The base uses a 3/8"-16 locating screw for ARRI-style locating holes.
  • The top has a retractable 1/4"-20 locating screw, built-in locating pins, and a silicone pad intended to help limit twisting and scratching.
  • The mount supports 360-degree panning and 180-degree tilting, including horizontal or vertical monitor installation.

Pros

  • Supports both landscape and portrait monitor orientation while retaining tilt adjustment.
  • Combines full 360-degree pan with 180-degree tilt for flexible framing.

Consider before buying

  • The base connection is specific: buyers need a compatible 3/8"-16 ARRI locating hole for the intended locating fit.
  • The product description gives no payload limit, so check the monitor's weight and the complete rig's support requirements before relying on this mount.
Read the full review summary

The SMALLRIG 6314 is designed to connect a compatible monitor to a camera cage, top handle, or other support with a 1/4"-20 threaded or locating hole.

Its 360-degree pan and 180-degree tilt give operators room to reframe the monitor, while the mount's design supports both horizontal and vertical installation.

A thumb knob is intended for adjustment and mounting, with an included L-shaped Allen wrench available for additional tightening.

The strongest fit is a compact rig where the monitor and support have the specified connection points, especially when portrait orientation or frequent repositioning matters.

The anti-twist locating features and silicone pad may help keep the monitor aligned and protect its surface, but buyers should confirm their exact monitor interface and the support's ARRI locating hole before purchase.

At 75.6 grams, the mount is relatively light as a rig component; the product description does not give a payload limit, so suitability for a particular monitor depends on the complete setup.

The buying factors

SMALLRIG 6314 Mount Scorecard

Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.

9/10

Positioning range

The stated 360-degree pan and 180-degree tilt offer broad adjustment, including vertical mounting with tilt retained.

9/10

Orientation flexibility

Designed for horizontal and vertical monitor installations, which suits landscape and portrait shooting.

8/10

Mounting security features

Locating screws, built-in locating pins, and a silicone pad address twisting and surface contact at the connection points.

7/10

Rig compatibility clarity

The description identifies specific 1/4"-20 and 3/8"-16 interfaces, making a fit check straightforward, though compatibility still depends on the user's cage or handle.

8/10

Adjustment convenience

A thumb knob supports angle adjustment and mounting, while an Allen wrench is included for additional tightening.

8/10

Portability

The 75.6-gram weight favors a compact rig, although the mount's own weight does not establish a supported monitor limit.

Key Features and Specifications of SMALLRIG 6314 Mount

  • Model 6314 is designed to mount a video monitor on a camera cage, top handle, or other support with a 1/4"-20 threaded hole or locating hole.
  • The base uses a 3/8"-16 locating screw for ARRI-style locating holes.
  • The top has a retractable 1/4"-20 locating screw, built-in locating pins, and a silicone pad intended to help limit twisting and scratching.
  • The mount supports 360-degree panning and 180-degree tilting, including horizontal or vertical monitor installation.
  • Tilt damping can be adjusted with the thumb knob for devices of different weights; an L-shaped Allen wrench is included for additional tightening.
  • The body uses black anodized aluminum alloy and stainless steel, and the mount weighs 75.6 grams.

Pros and Cons of SMALLRIG 6314 Mount

Pros

  • Supports both landscape and portrait monitor orientation while retaining tilt adjustment.
  • Combines full 360-degree pan with 180-degree tilt for flexible framing.
  • Locating details at both connection areas are designed to help resist unwanted rotation.
  • Thumb-operated adjustment and an included Allen wrench provide two ways to tighten the setup.

Consider before buying

  • The base connection is specific: buyers need a compatible 3/8"-16 ARRI locating hole for the intended locating fit.
  • The product description gives no payload limit, so check the monitor's weight and the complete rig's support requirements before relying on this mount.
  • The listed monitor compatibility examples include the Ninja TX, TX GO, Shinobi II, Ninja V, and V+, but buyers with other monitors should confirm the top interface and locating-pin alignment.

Who Should Buy SMALLRIG 6314 Mount?

Good fit

Consider the SMALLRIG 6314 if your camera cage or handle has the matching base connection and you want a monitor mount that can switch between portrait and landscape positions.

The broad pan and tilt range should be useful when framing changes between handheld operation, tripod work, or different camera orientations.

Its appeal is the combination of compact weight, angle adjustment, and anti-twist details at the monitor and support interfaces.

Before ordering, check the cage or handle's locating-hole pattern, confirm that the monitor accepts the top screw arrangement, and compare the monitor's weight with the needs of your rig since no payload figure is provided here.

Who should skip it

Skip this design if your support lacks the 3/8"-16 ARRI locating hole needed for its base connection, or if you need a mount with a clearly specified load rating before selecting equipment.

It may also be a poor fit if you need a different attachment style or a monitor interface that does not work with the top screw and locating features.

Confirm those connection details for your exact equipment before choosing.

What the SMALLRIG 6314 Mount Means for a Camera Rig

Connection fit is the first decision

This mount's flexibility depends on compatible endpoints. At the base, its 3/8"-16 locating screw is intended for an ARRI locating hole; at the top, a retractable 1/4"-20 locating screw and pins serve the monitor side.

Checking both interfaces first is more useful than focusing on the adjustment range alone, because a mismatch at either end can prevent the mount from serving its intended role.

Portrait framing without giving up tilt

Many monitor setups are built around a horizontal screen, while vertical video can call for a different orientation. The 6314 is explicitly designed to support both horizontal and vertical installation and retain tilt adjustment when mounted vertically.

That makes it a considered option for operators who switch aspect orientation, though the available range does not by itself establish clearance around a particular camera body or accessory layout.

Adjustment range and tightening

The stated 360-degree pan and 180-degree tilt allow the monitor to be aimed through a wide range of positions.

Tilt damping is adjustable by thumb knob for devices of different weights, and the included Allen wrench can provide additional tightening.

Since no supported weight is specified, operators should check their monitor and assembled rig rather than treating the adjustment mechanism as a load guarantee.

A compact component with useful contact details

At 75.6 grams, this mount adds relatively little weight on its own. Its aluminum alloy and stainless steel construction is paired with a silicone pad and locating features intended to discourage twisting and scratching.

Those are useful design considerations for a monitor interface, but the full rig's stability still depends on the compatibility and tightening of every connection.

Alternatives to SMALLRIG 6314 Mount

Camera Mounts & Clamps alternative

SMALLRIG 2905B Field Monitor Mount Holder
4.7/5

2,000+ ratings

Read Amazon Reviews

SMALLRIG 2905B Field Monitor Mount Holder

Choose the 2905B if your rig needs a cold shoe base and its stated monitor sizing and load guidance fit your setup.

The 6314 is the more relevant option when you specifically need its ARRI locating connection or portrait installation support.

  • The 2905B uses a cold shoe adapter at the bottom, supports 5- and 7-inch monitors, and provides 180-degree tilt and 360-degree swivel.
  • Its description gives angle-dependent load capacities and specifies an Allen wrench for swivel tension.
  • The 6314 uses a 3/8"-16 ARRI locating screw at the base and is designed for horizontal or vertical monitor installation.

Camera Mounts & Clamps alternative

SMALLRIG 2732 Magic Arm Clamp Kit
4.6/5

3,000+ ratings

Read Amazon Reviews

SMALLRIG 2732 Magic Arm Clamp Kit

Choose the 2732 when you need a longer reach and a clamp that can attach to a suitable rod, tube, or edge.

The 6314 better suits a direct, compact monitor connection where its locating interfaces and portrait-orientation support match the rig.

  • The 2732 pairs a 9.8-inch articulating arm with a super clamp that opens from 15 mm to 54 mm.
  • The arm has 1/4-inch screws at both ends, and the clamp includes 1/4-inch and 3/8-inch threads.
  • The 6314 is a compact monitor mount with pan and tilt adjustment and a locating-screw connection at the base.

Is SMALLRIG 6314 Mount Worth It?

The SMALLRIG 6314 Adjustable Monitor Mount is worth considering for a compact camera rig that needs broad monitor adjustment, portrait and landscape positioning, and compatible ARRI-style locating hardware. Its anti-twist design details and thumb-adjustable tilt add practical flexibility.

Buy after confirming the base and monitor connections fit your equipment.

Because the description provides no payload limit, verify that the mount is appropriate for your monitor and complete setup; if your rig instead needs a cold shoe or a longer clamp arm, another mounting format may fit better.

Your review at a glance

SMALLRIG 6314 Adjustable Monitor Mount
4.7/5

800+ ratings

Read Amazon Reviews

SMALLRIG 6314 Adjustable Monitor Mount

A compact camera monitor mount for creators who need landscape or portrait positioning, broad angle adjustment, and a locating connection to compatible support gear.

  • Model 6314 is designed to mount a video monitor on a camera cage, top handle, or other support with a 1/4"-20 threaded hole or locating hole.
  • The base uses a 3/8"-16 locating screw for ARRI-style locating holes.
  • The top has a retractable 1/4"-20 locating screw, built-in locating pins, and a silicone pad intended to help limit twisting and scratching.
  • The mount supports 360-degree panning and 180-degree tilting, including horizontal or vertical monitor installation.

Written by

hpautowerks.com Editorial Team

Editorial team

hpautowerks.com publishes practical how-to guides and educational articles with clear steps and useful context.

Amazon customer reviews

See what buyers think

Explore customer reviews, photos and available video reviews on Amazon.

SMALLRIG 6314 Adjustable Monitor Mount

SMALLRIG 6314 Adjustable Monitor Mount

A compact camera monitor mount for creators who need landscape or portrait positioning, broad angle adjustment, and a locating connection to compatible support gear.

  • Model 6314 is designed to mount a video monitor on a camera cage, top handle, or other support with a 1/4"-20 threaded hole or locating hole.
  • The base uses a 3/8"-16 locating screw for ARRI-style locating holes.
Check Video Reviews on Amazon