The SmallRig 1138 camera clamp review is for creators who want a compact way to mount a camera or accessory to a nearby support.
Its clamp, dual ball head, 1/4-inch-20 screw, and included action-camera adapter make it suited to small rigging tasks, with a stated load limit of 1.5 kg.
SmallRig 1138 Clamp Review Summary
The quick verdict

8,000+ ratings
Read Amazon ReviewsSmallRig 1138 Super Clamp
A useful option for creators who need to clamp a small camera or accessory to a rod, tube, table, or frame without drilling.
- The super clamp uses a locking knob to attach to a rod, tube, table, frame, or tripod without drilling.
- A dual ball-head assembly connects gear through a 1/4-inch-20 screw.
- An action-camera adapter is included for compatible action cameras.
- The stated maximum load capacity is 1.5 kg.
Pros
- Combines a clamp and adjustable ball-head mounting point in one compact accessory.
- Attaches to several common support types without requiring a drilled hole.
Consider before buying
- The 1.5 kg maximum means it is not intended for heavier camera or accessory combinations.
- Dynamic use requires a safety rope, adding another item and setup step.
Read the full review summary
SmallRig’s 1138 combines a clamping base with a dual ball head and a 1/4-inch-20 mounting screw, so you can secure compatible gear to a rod, tube, table, frame, or tripod without drilling.
The included action-camera adapter extends its usefulness to compatible action cameras, while the locking knob offers a straightforward way to tighten the setup.
Its compact size and 0.2 kg weight suit a small camera, light, microphone, or monitor in a desktop, vehicle, or production setup.
The 1.5 kg maximum capacity is a firm planning boundary, and the supplied safety note calls for a safety rope in dynamic situations. Check that your mounting point and attached gear are appropriate before relying on the clamp.
The buying factors
SmallRig 1138 Clamp Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Mounting flexibility
The clamp can attach to several kinds of support, including rods, tubes, tables, frames, and tripods.
Accessory compatibility
A 1/4-inch-20 screw and included action-camera adapter cover a useful range of small production gear.
Positioning options
The dual ball-head layout suggests flexible positioning, though the description does not specify adjustment range.
Load capacity
The stated maximum is 1.5 kg, which limits its role to appropriately light setups.
Portability
At 0.2 kg and roughly 3.74 by 3.35 by 0.98 inches, it is easy to fit into a compact rigging kit.
Material construction
Aluminum and stainless steel construction is a practical choice for a reusable mount.
Key Features and Specifications of SmallRig 1138 Clamp
- The super clamp uses a locking knob to attach to a rod, tube, table, frame, or tripod without drilling.
- A dual ball-head assembly connects gear through a 1/4-inch-20 screw.
- An action-camera adapter is included for compatible action cameras.
- The stated maximum load capacity is 1.5 kg.
- Aluminum and stainless steel are the listed enclosure materials.
- The clamp measures approximately 3.74 by 3.35 by 0.98 inches and weighs 0.2 kg.
- The supplied package includes the super camera clamp mount and action-camera mount adapter.
Pros and Cons of SmallRig 1138 Clamp
Pros
- Combines a clamp and adjustable ball-head mounting point in one compact accessory.
- Attaches to several common support types without requiring a drilled hole.
- Includes a separate adapter for compatible action cameras.
- Uses aluminum and stainless steel, with a stated capacity suitable for light production gear.
Consider before buying
- The 1.5 kg maximum means it is not intended for heavier camera or accessory combinations.
- Dynamic use requires a safety rope, adding another item and setup step.
- Before buying, check the support’s dimensions and surface shape against the clamp opening and intended mounting position.
Who Should Buy SmallRig 1138 Clamp?
Good fit
Consider the 1138 if you need to place a compact camera or accessory on a nearby rod, tube, table, frame, or tripod.
It is particularly relevant for small production setups where a clamp-mounted position can help keep a camera, microphone, light, or monitor close to the action without adding a dedicated stand.
The included action-camera adapter is useful if that is part of your kit, and the 1/4-inch-20 connection supports other compatible gear.
Keep the full mounted setup comfortably within the 1.5 kg maximum, make sure the clamp can seat securely on your chosen support, and use a safety rope for dynamic situations as advised.
Who should skip it
Look elsewhere if your planned gear exceeds the 1.5 kg maximum, or if your setup needs a mount that can be used without a secure clamping point.
For moving or vibration-prone use, account for the recommended safety rope and confirm that the support and attachment suit the conditions.
How the SmallRig 1138 Clamp Fits a Compact Rig
A clamp-first mounting approach
The 1138 anchors to an existing support rather than requiring a new hole or a separate stand.
That makes it a practical choice when a rod, tube, table edge, frame, or tripod is already positioned where you need the gear.
Check the intended support’s thickness and shape before purchase, since compatibility depends on the clamp seating correctly.
Ball-head positioning for small accessories
The dual ball-head layout adds angle adjustment between the clamped base and the attached device. A 1/4-inch-20 screw gives it a familiar connection for compatible cameras and accessories, while the included action-camera adapter addresses another common mounting interface.
The product description does not give an adjustment range, so consider whether the physical reach and angles will work in your rig.
Plan around the load limit
A maximum capacity of 1.5 kg puts the 1138 in the light-accessory category. Count the weight of the attached device and any adapter or connected equipment together, and leave room below the stated ceiling when practical.
For dynamic scenarios, follow the safety-rope recommendation and consider how movement could affect the whole mounting point.
Alternatives to SmallRig 1138 Clamp
Camera Mounts & Clamps alternative

3,000+ ratings
Read Amazon ReviewsSmallRig 2732 Magic Arm Clamp Kit
Choose the 1138 if a compact clamp-mounted ball head and included action-camera adapter suit your setup.
Consider the 2732 if you need a longer arm to position gear farther from the clamping point or want its additional 3/8-inch thread options.
- The 2732 pairs a super clamp with a 9.8-inch articulating arm.
- It has 1/4-inch and 3/8-inch threaded holes, an arm with 1/4-inch screws at both ends, and a clamp opening listed from 15 mm to 54 mm.
- The 1138 combines its clamp and dual ball-head connection in a compact unit, with an action-camera adapter included and a stated maximum capacity of 1.5 kg.
Camera Mounts & Clamps alternative

800+ ratings
Read Amazon ReviewsSmallRig 4103 Double Clamp Mount
The 1138 is the simpler fit for a light accessory attached to one support point.
Consider the 4103 when you specifically need two clamps and its higher stated load capacity, while checking that your rods fall within its listed diameter range.
- The 4103 has two clamps, a 360-degree double-ball-head design, and a stated maximum load of 3.5 kg.
- Its clamps are listed for rods from 14 mm to 60 mm in diameter.
- The 1138 uses one clamping base, a dual ball head, and a 1/4-inch-20 screw, with a 1.5 kg stated maximum capacity.
Is SmallRig 1138 Clamp Worth It?
The SmallRig 1138 Super Clamp is worth considering for compact camera and accessory setups that can use a secure clamp point. Its included action-camera adapter, 1/4-inch-20 connection, and dual ball-head design make it a versatile small rigging tool.
Keep the 1.5 kg maximum in view, check fit against your support, and use a safety rope in dynamic situations.
If those limits match your setup, the 1138 is a sensible option for adding a mount without drilling or carrying a larger support.
Your review at a glance

8,000+ ratings
Read Amazon ReviewsSmallRig 1138 Super Clamp
A useful option for creators who need to clamp a small camera or accessory to a rod, tube, table, or frame without drilling.
- The super clamp uses a locking knob to attach to a rod, tube, table, frame, or tripod without drilling.
- A dual ball-head assembly connects gear through a 1/4-inch-20 screw.
- An action-camera adapter is included for compatible action cameras.
- The stated maximum load capacity is 1.5 kg.