The Silkland DP80 DisplayPort Cable review is most relevant to gamers building a compact, direct connection between a DisplayPort graphics card and monitor.
Its VESA-certified DP 2.1 design targets demanding high-refresh displays, though the source devices still determine which modes are available.
Silkland DP80 Cable Review Summary
The quick verdict

2,000+ ratings
Read Amazon ReviewsSilkland DP80 DisplayPort Cable
A short DisplayPort cable for gamers connecting nearby DP 2.1 equipment who want VESA-certified 80Gbps capability and high refresh-rate support.
- VESA-certified DisplayPort 2.1 cable with up to 80Gbps data transfer and UHBR20 support.
- Supports uncompressed 4K at 240Hz, 8K at 60Hz, and 2K at 540Hz; DSC-enabled ceilings include up to 16K at 60Hz, 8K at 240Hz, and 4K at 540Hz, 480Hz, or 360Hz.
- Lists dynamic HDR10+, 3D, HDCP 2.3, VRR, FEC, ALLM, DSC 1.2a, and MST support.
- Backward compatible with DisplayPort 2.0 and 1.4, and supports uncompressed 7.1, 5.1, and 2.0 audio pass-through.
Pros
- High bandwidth and clearly specified high-refresh display modes make it a plausible match for demanding DP 2.1 setups.
- The compact 1.6-foot length can keep a nearby monitor connection tidy.
Consider before buying
- The short length is restrictive if the PC and monitor are not close together or if the cable must follow a longer route.
- The highest listed modes depend on the capabilities of both the graphics card and monitor; the cable alone cannot provide them.
Read the full review summary
The DP80’s headline is its 80Gbps DisplayPort 2.1 bandwidth and support for uncompressed 4K at 240Hz, 8K at 60Hz, and 2K at 540Hz.
With Display Stream Compression enabled, the listed ceilings extend to up to 16K at 60Hz, 8K at 240Hz, and 4K at 540Hz, 480Hz, or 360Hz.
These are capability limits, not guaranteed results: both the graphics card and display need to support the relevant mode, and the data specifically recommends DP 2.1 UHBR20 on both ends.
At 1.6 feet, this is intended for equipment placed close together, such as a desktop tower beside a monitor.
The short run helps avoid excess cable around a compact setup, but gives little room for routing or moving components.
Its no-latch male-to-male connectors, braided nylon exterior, triple shielding, and stated 24-month service period add practical details for buyers considering a high-bandwidth link.
The buying factors
Silkland DP80 Cable Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Bandwidth ceiling
Its 80Gbps DP 2.1 UHBR20 design is suited to high-bandwidth display modes when both connected devices support them.
High-refresh support
The listed uncompressed modes include 4K at 240Hz and 2K at 540Hz, with higher ceilings possible using DSC.
Connection reach
The 1.6-foot length fits close placements but restricts routing distance and flexibility.
Build details
Triple shielding, tinned copper conductors, gold-plated connectors, and a nylon exterior are useful construction features.
Setup convenience
Plug-and-play use and latch-free connectors simplify handling, though the cable still needs an accessible, compatible DP port.
Compatibility clarity
It lists broad DP-device compatibility and support for DP 2.0 and 1.4, while peak DP 2.1 modes depend on compatible source and display hardware.
Key Features and Specifications of Silkland DP80 Cable
- VESA-certified DisplayPort 2.1 cable with up to 80Gbps data transfer and UHBR20 support.
- Supports uncompressed 4K at 240Hz, 8K at 60Hz, and 2K at 540Hz; DSC-enabled ceilings include up to 16K at 60Hz, 8K at 240Hz, and 4K at 540Hz, 480Hz, or 360Hz.
- Lists dynamic HDR10+, 3D, HDCP 2.3, VRR, FEC, ALLM, DSC 1.2a, and MST support.
- Backward compatible with DisplayPort 2.0 and 1.4, and supports uncompressed 7.1, 5.1, and 2.0 audio pass-through.
- Male-to-male DisplayPort connectors without a latch; 1.6-foot gray cable with a nylon exterior.
- Built with 28AWG tinned copper conductors, triple shielding, and 24K gold-plated connectors.
- Designed for indoor DisplayPort connections between graphics hardware and monitors; Silkland lists 24-month service and technical support.
Pros and Cons of Silkland DP80 Cable
Pros
- High bandwidth and clearly specified high-refresh display modes make it a plausible match for demanding DP 2.1 setups.
- The compact 1.6-foot length can keep a nearby monitor connection tidy.
- No-latch connectors avoid a release mechanism and are described as plug-and-play.
- Shielding, tinned copper, gold-plated connectors, and a nylon exterior provide several considered construction details.
Consider before buying
- The short length is restrictive if the PC and monitor are not close together or if the cable must follow a longer route.
- The highest listed modes depend on the capabilities of both the graphics card and monitor; the cable alone cannot provide them.
- The connector has no latch, so buyers who prefer a mechanically locking connection should consider whether that handling style suits their setup.
Who Should Buy Silkland DP80 Cable?
Good fit
Consider the Silkland DP80 Cable if your monitor and PC sit close together and you want a VESA-certified DisplayPort 2.1 connection with substantial bandwidth headroom.
It is aimed at gamers using high-refresh displays, especially where the source and monitor can negotiate the advanced modes listed for the cable.
Before choosing it, check the ports and supported resolution-refresh combinations on both devices. For the upper DP 2.1 bandwidth, the product specifically calls for UHBR20 capability on the graphics card and monitor.
Also measure the real cable path, allowing for connector placement and bends; 1.6 feet can be a snug fit even when the devices look close on a desk.
Its listed HDR, variable refresh, DSC, multi-stream, and audio features may suit a gaming or multi-display workstation, provided the rest of the equipment supports the functions you intend to use.
The listed 24-month service period is another purchase consideration if you value access to manufacturer support.
Who should skip it
Skip this length if your computer is under a desk, your monitor is across a room, or your setup needs slack for repositioning. Measure first and choose a longer cable when the route exceeds the short reach.
Look elsewhere if your equipment lacks DisplayPort ports, or if your priority is a cable with a latch.
Also temper expectations if you are buying only for a particular maximum refresh rate: confirm that both connected devices support that exact display mode.
What the Silkland DP80 Cable means for a gaming setup
Bandwidth and the source-device check
The DP80 is positioned for a high-end DisplayPort link, with 80Gbps bandwidth and an explicit UHBR20 reference. Its resolution and refresh-rate figures describe supported ceilings across different operating conditions.
Buyers should match the desired mode to the specifications of both monitor and graphics card, including whether DSC is involved, rather than treating the cable’s maximum as a standalone guarantee.
A short run changes the installation
At 1.6 feet, this cable is best considered for a close, direct connection.
A short cable can reduce slack around a compact desk, but it leaves little margin for cable-management detours, ports that sit far apart, or moving the PC after installation.
Measure the full path, not just the gap between the devices.
Construction and connector handling
The cable combines 28AWG tinned copper conductors with triple shielding and a nylon outer covering. These design choices are intended to support signal integrity and withstand handling, but do not establish a measured lifespan or guarantee against interference.
Its connectors have no latch, which may make removal straightforward; buyers should consider whether that suits their port access and preference.
Useful extras depend on the rest of the system
HDR10+, VRR, FEC, ALLM, DSC 1.2a, MST, and multi-channel audio pass-through broaden the cable’s stated feature set. A feature matters only when the connected equipment and software path also support it.
For a single monitor, MST may be immaterial; for multiple displays, check the graphics hardware and monitor arrangement before planning the setup.
Alternatives to Silkland DP80 Cable
One useful alternative is included because it offers a substantially longer cable with a different bandwidth ceiling and listed display modes.
Computer DisplayPort Cables alternative

7,000+ ratings
Read Amazon ReviewsSilkland 54Gbps 16K DisplayPort Cable, 10 ft
Choose the DP80 when a very short run and its higher bandwidth ceiling fit your DP 2.1 setup.
Consider the 10-foot cable when you need more routing reach and its listed 54Gbps modes suit your display; compare the exact device-supported resolution and refresh rate before deciding.
- This 10-foot Silkland cable is rated at 54Gbps and lists up to 16K at 60Hz with DSC, 8K at 120Hz, and 4K at 240Hz.
- It also supports DSC 1.2a, Dynamic HDR, and audio pass-through, with backward compatibility extending to DisplayPort 1.0.
- The DP80 is the shorter, higher-bandwidth option, with an 80Gbps rating and 1.6-foot length.
Is Silkland DP80 Cable Worth It?
The Silkland DP80 DisplayPort Cable is worth considering for a close-range gaming setup that can use a VESA-certified 80Gbps DP 2.1 link.
Its high-refresh capabilities, construction details, and latch-free connectors make it a feature-rich short cable for compatible equipment.
Check UHBR20 and the exact display mode on both connected devices, then measure the cable route before buying.
If you need more than 1.6 feet or your hardware cannot use its higher-bandwidth modes, its main advantages may not match your setup.
Your review at a glance

2,000+ ratings
Read Amazon ReviewsSilkland DP80 DisplayPort Cable
A short DisplayPort cable for gamers connecting nearby DP 2.1 equipment who want VESA-certified 80Gbps capability and high refresh-rate support.
- VESA-certified DisplayPort 2.1 cable with up to 80Gbps data transfer and UHBR20 support.
- Supports uncompressed 4K at 240Hz, 8K at 60Hz, and 2K at 540Hz; DSC-enabled ceilings include up to 16K at 60Hz, 8K at 240Hz, and 4K at 540Hz, 480Hz, or 360Hz.
- Lists dynamic HDR10+, 3D, HDCP 2.3, VRR, FEC, ALLM, DSC 1.2a, and MST support.
- Backward compatible with DisplayPort 2.0 and 1.4, and supports uncompressed 7.1, 5.1, and 2.0 audio pass-through.